Black Flecks or Musty Smell on Laundry: Gasket or Not?
By Eyal Malka, owner of Vent Pro NYC · 12 years in the trade
Published · Reviewed · 4 min read
The cycle finished, the laundry is supposed to be clean, and there are dark flecks on a white towel or a smell like a damp basement in the fabric. We will be straight about one thing first: nobody can identify every fleck from a description, us included. What we can tell you is where black growth and musty smells live in a front-loader, and the order we would check them in.
First: the door seal
Fold the rubber lip back toward you and look in the channel underneath, especially at the bottom, where water sits. A dark ring, slime, or standing water means you have found the most common source of a musty washer: mold in the gasket fold. The hot wash runs through the drum, not the fold. The water that sits in the seal never drains, and the wash carries the smell into your clothes. That fold also sits right at the opening every load passes through. Here is why the seal, specifically.
Second: the drain filter
If the seal is clean, look at the drain pump filter behind the small panel at the bottom front. It sits in standing water with whatever lint, hair, and debris it has caught, and it can smell. Our drain filter guide shows how to open and clear it.
Third: the dose
A front-loader uses little water, and extra detergent in low water ends the cycle as residue. If the seal feels slick, or the drum smells sweet rather than clean, the dose is too high. Fabric softener coats the rubber and holds residue in the fold. Use HE detergent, measure it, and go easy on softener; the detergent trap is the same on every brand.
When it isn’t the machine
Close the washer door and smell the room. If the smell is just as strong with the door shut, look to the drain or the room, not the washer; this guide sorts the three apartment smells. Mold on walls, ceilings, or floors is not a washer problem: in New York that work belongs to a NYS-licensed mold remediation contractor, and it is not what we do.
Should you worry?
For most homes this is a laundry and odor problem, worth fixing and not worth panicking over. Our level-headed answer covers what a moldy seal does and does not do.
What fixes it
If the seal is the source, a light case is a DIY job, walked through in our DIY guide. An established colony that keeps coming back is our job: one visit, our four-step treatment in every fold, and the drain filter cleaned, for $179.99 flat. Then a simple schedule helps keep the flecks and the mold from coming back.
