How Often Should a Washer Gasket Be Cleaned?
By Eyal Malka, owner of Vent Pro NYC · 12 years in the trade
Published · Reviewed · 4 min read
There isn’t one number, because a washer gasket gets three different kinds of cleaning and each runs on its own clock. Here is the schedule we give customers, and the things that move it.
After the last load of the day: a wipe
Fold the lip back, run a dry cloth around the channel, and leave the washer door cracked so the seal dries, as long as an open door is safe with kids and pets around. That is the 20-second habit, and it does most of the work.
About once a month: a full clean and a hot cycle
- The full clean. Soapy water and a soft brush in every fold, about once a month, or sooner if you see spots or notice a smell. Our DIY guide has the method.
- The tub-clean cycle. Run the machine’s hottest tub-clean cycle empty, about once a month or as your manual says. It flushes the drum and the plumbing; it does not reach mold already in the folds.
- The drain filter. On the schedule in your manual. Here is how.
Every 6–9 months: a professional cleaning
Water sits in the gasket fold after every wash, so most of our gasket customers book a fresh cleaning every 6–9 months to keep the black buildup and the musty smell from coming back. Leaving the door open between loads keeps the fold drier, so growth is slower to return after a visit. The visit itself is our four-step treatment in every fold plus the drain filter, for $179.99 flat; here is what happens at one.
What moves the schedule up
- It came back within a couple of weeks of a good DIY clean. The colony is deeper in the fold than a cloth reaches, and another round of DIY usually costs more than it saves.
- The washer lives in a closet or under a dryer. A wet seal in still air stays wet; stacked pairs are the hardest case.
- Too much detergent or softener. Leftover product in the folds is what mold feeds on.
- The door stays shut between loads. A sealed wet gasket never dries.
What doesn’t set the schedule
The black staining. Stains soak into the rubber and fade rather than vanish, even after the mold in them is gone, so judge the seal by the smell and the growth, not its shade. More on stains.
